Cement Blocks & Foundation Accessories

Cement Blocks

We stock an inventory of cement blocks. The sizes range from 4" to 12". Concrete blocks are 16" long. You can either buy small quantities out of our yard or we can arrange with the manufacturer to have full house loads shipped directly to your site.
Contact Us

Cement Blocks

We stock an inventory of cement blocks. The sizes range from 4" to 12". Concrete blocks are 16" long. You can either buy small quantities out of our yard or we can arrange with the manufacturer to have full house loads shipped directly to your site.
Contact Us

Cement Blocks

Generally, in this truckload situation, we need 2 or 3 days advance notice. We can calculate the number of blocks that you need including the corner blocks.
We also stock the necessary cement and forming boards. If you need a contractor, you can refer to our "Contractor Referrals" section of our menu under " Foundations".

As you can see from the picture, we also can rent you the necessary scaffolding for the job. Our design department can figure out the size of block that you will require. There are a number of factors but the backfill height is one of the most important issues.
Contact Us

Corrugated Tubing Plastic

armtec-canada-culvert-logo
Big 'O' provides a complete range of drainage tubing products designed to collect and remove subsurface water in various situations. From solid to perforated, or perforated with sock we have a product application. We carry 4" perforated, solid, Hydro and Filtered. We also carry 6" perforated.

Plastic Culverts Boss 2000

BOSS 2000 is a dual-wall corrugated HDPE drainage pipe with a smooth inner wall to offer superior hydraulic performance for both storm sewers and culvert applications, ranging from diameters of 100mm to 900mm.

BOSS 2000 is offered in two product lines:
  • Municipal and highway storm sewer and culverts: 320kPa stiffness; certified to CSA B182.8 with the CSA logo; 6m lengths; bell and gasket joints
  • Resource road culverts: 210kPa – 260kPa stiffness; conforming to CSA B182.8 (no CSA logo); 9.5m lengths; plain ends
The pipe wall can also be factory perforated and fitted with a woven geotextile sock for use in subdrain or recharge drainage applications.

A wide variety of fabricated fittings certified to CSA B182.8 are available, as well as fittings necessary to tie in PVC pipe, such as Inserta-tees and SDR adapters.

Product Features:


  • Impact resistant to avoid installation damage
  • UV-resistant
  • Abrasion resistance
  • Resistant to a wide range of chemicals
  • Resistant to strong acids and bases (pH range 1.25 to 14)
  • Fast installation – lightweight and long lengths with fewer joints
  • Quick on-site cutting – can be trimmed to length in seconds

Typical Applications:


  • Municipal and highway storm sewers and culverts
  • Resource road culverts
  • Recharge drainage systems
  • Leachate collection systems
  • Stormwater management
  • Airport runway sewers

Specifications Pipe Size:


  • Diameters (mm) – 100, 150, 200, 250, 300, 375, 450, 525, 600, 750, 900
  • Length (m) – 6m or 9.5m (resource road culverts only)
armtec-canada-culvert-logo

Platon Foundation Wrap

Platon foundation wrap keeps wet soil away from the foundation wall. Any moisture that may find its way past the membrane is carried to the foundation drain by the air gap drainage path. Platon Foundation Protector is commonly used to waterproof block walls, poured concrete walls, permanent wood, existing foundations and Insulated Concrete Forms (ICF).
Contact Us
Share by: